Using a Stream Deck to control Your Shapeoko (Using UGS)


This doc is a work in progress!

  1. Setup UGS

    1. Open UGS

    2. Import UGS Macros

    3. Modify Macro Coordinates (or Commands) as necessary

    4. Save Changes

    5. Restart UGS (to ensure macro hotkeys are refreshed)

    6. Open UGS

    7. Import UGS Profile (this will import the hotkey profiles)

    8. Save Changes

    9. Restart UGS

  2. Setup Stream Deck

    1. Open Stream Deck Software

    2. Import the streamdeck Profile

    3. Set Profile As Default

  3. Enjoy your new UGS/Stream Deck setup!